AllSpark 12V 1000 Watt Pure Sine Wave Inverter

Description

24 MONTHS MANUFACTURERS WARRANTY!
30 DAY MONEY BACK GUARANTEE!

The AllSpark 1000W Pure Sine Wave Inverter also has an overdrive function allowing for max output of 1200 Watts allowing you to run combined loads for shorter durations of 20-30 mins, depending on the ambient temperature. (Eg. on a cold night you can run 1200 Watts continuously, but on a 45 degree day, it will run for up to about 20-30 mins or until the high temperature protection mode kicks in.)

With an LCD digital display showing battery input voltage & AC output voltage, as well as dual Australian sockets, this AllSpark inverter is simple and has a user a friendly design.

The unit comes with a remote switching panel, with 5m cable and power status indicator to allow you to flush mount this control panel in any panel 3mm to 20mm thick. This means you can place your inverter out of sight (under a bed, in a cupboard, under a seat), and still easily turn the unit on and off when power is required (template provided in manual).

The anodized aluminium housing holds an intelligent brushless fan and voltage/current protections. They also have an extremely low no load draw and high conversion efficiency of over 90% - so you can be sure that your inverter wont run your batteries down if left on, and will use your stored power efficiently with minimal power loss.

Features

This 1000 Watt Pure Sine Wave Inverter provides a genuine 1000 Watts of continuous power & 2000 Watt start up peak/surge power
Overdrive function allowing for max output of 1200 Watts allowing you to run combined loads for shorter durations of 20-30 mins
LCD digital display showing battery input voltage & AC output voltage
Remote switching panel, with 5m cable and power status indicator to allow you to flush mount this control panel in any panel 3mm to 20mm thick
Optional Plug & Play Pop-up Power Outlet

Owned & run by an Aussie Family
Emergency technical support 7 days a week
Manufactured for Australian conditions

24 MONTHS MANUFACTURERS WARRANTY!
30 DAY MONEY BACK GUARANTEE!

Specifications

SKU	AS-100012IPSWREMG1
Brand	AllSpark
Shipping Weight	3.2500kg
Shipping Width	0.370m
Shipping Height	0.170m
Shipping Length	0.215m
Shipping Cubic	0.013523500m3

What's in the box?

1 x AllSpark 1000 Watt Pure Sine Wave Inverter
1 x set of red/black screw terminals and flat washers for cable connection
1 x remote switching panel with mounting screws
1 x set of spare internal fuses

FAQs

Do I need circuit protection for installation?

Yes, you will need a 100A circuit breaker for installation. Whilst you can go with a fuse holder and mega fuse, we recommend an AllSpark 100A Circuit Breaker as it allows you to isolate via the push-to-trip function, and also can be re-set should an overload event occur (without blowing a fuse, which can be costly and inconvenient to replace).

What cable size do I need for installation?

It requires a minimum of 6 B&S cable if under 1m long or 4 B&S cable if over 1m in length to avoid voltage drop.

What will it run?

Our AllSpark 1000 Watt Pure Sine Wave Inverter will run continuously at 1000 watts unlike some cheap brands that claim they can, but struggle to provide half that output.

Any 240v device that you can plug in at home will run on this Inverter.
• Microwave - 800 - 1200w
• Toaster - 800w to as high as 1200w
• Laptops - most run between 60w and 180w
• Hair Dryer - 900-1200w
• Any other 240v devices - Anything you need that's under 2000w - drones, cameras, computers, IT equipment, cordless tool chargers etc.

Will this run my microwave?

Some, but not all. The AllSpark 1000 Watt Pure Sine Wave Inverter will run at 1000 Watt continuous output until the battery goes flat and 2000w as a startup wattage.

Microwaves have 2 key numbers to take into account:
- the watts of cooking power, eg. many caravan microwaves are around 800W
- the total input power, which is the total power that the microwave consumes from your battery including running the lights, control panel, turntable and fan.

Whilst it may have 800W of cooking power, it still uses more power to spin the turn table, run the control panel, internal light and fan etc, which makes up the rest of the power consumption. So before sizing an inverter, you need to check the input power (not the cooking watts) which is more likely 1200w for a 800w cooking power model.
For many microwaves there is 30-50% more to get to the input power above the cooking power. You may need to check your manual or online for the full specifications of your microwave.

Will my existing battery power this Inverter?

Simple answer is yes - pretty much any deep cycle battery over 100ah will be fine. A 1000 watt inverter is a medium power device for a 12v system. 1000 watts at 12v is around 83 Amps.

If you are unsure please contact us for confirmation.