{"product_id":"battery-chargers-ac-to-dc-chargers-victron-inverter-charger-multiplus-ii-24v-5000va-1","title":"Victron Inverter-Charger MultiPlus-II 24V \/ 5000VA \/120A-100A 230V","description":"\u003ch3\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cstrong\u003eCOMBINED INVERTER AND CHARGER IN ONE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe MultiPlus-II is a multifunctional inverter\/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50 A resp. 100 A.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003ePOWER CONTROL AND POWER ASSIST\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eA maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003ePowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003eSOLAR ENERGY\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003eTWO AC OUTPUTS\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore\/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003eVIRTUALLY UNLIMITED POWER THANKS TO PARALLEL AND THREE PHASE OPERATION\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eUp to 6 Multis can operate in parallel to achieve higher power output.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW \/ 90 kVA inverter and more than 1200 Amps charging capacity.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003eON-SITE SYSTEM CONFIGERATION, MONITORING AND CONTROL\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eSettings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed).\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003ePair with the \u003ca href=\"https:\/\/www.offroadliving.com.au\/battery-monitors\/victron-cerbo-gx-system-controller\"\u003eCerbo GX\u003c\/a\u003e and \u003ca href=\"https:\/\/www.offroadliving.com.au\/battery-chargers\/?query=cerbogx%20diplay\"\u003edisplay \u003c\/a\u003efor full monitoring and control.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cfont color=\"#c0392b\"\u003e\u003cb\u003e\u003cu\u003eREMOTE CONFIGERING AND MONITORING\u003c\/u\u003e\u003c\/b\u003e\u003c\/font\u003e\u003c\/p\u003e\n\n\u003cp\u003eInstall a Cerbo GX to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#c0392b;\"\u003e\u003cu\u003e\u003cstrong\u003eWHATS IN THE BOX\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 x Victron Inverter-Charger  MultiPlus-II 24V \/ 5000VA \/120A-100A 230V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":43853079543875,"sku":"PMP245021010","price":2755.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/1926\/2275\/files\/PMP245021010.png?v=1789725237","url":"https:\/\/www.offroadliving.com.au\/products\/battery-chargers-ac-to-dc-chargers-victron-inverter-charger-multiplus-ii-24v-5000va-1","provider":"Offroad Living","version":"1.0","type":"link"}