Description

EPOWER 2000W TRUE SINE WAVE INVERTER WITH AC TRANSFER SWITCH & SAFETY SWITCH

The ePOWER 2000W Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, ePOWER inverters deliver clean and energy efficient true sine wave AC power from your DC supply.

The ePOWER 2000W is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation. All Enerdrive ePOWER Inverters are covered by our extensive 3-Year warranty.

 

2 YEAR MANUFACTURERS WARRANTY!
30 DAY MONEY BACK GUARANTEE!

 

This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board.


Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second. 

Specifications

SKU EN1120S-X
Brand Enerdrive
Shipping Weight 7.1000kg
Shipping Width 0.500m
Shipping Height 0.170m
Shipping Length 0.290m
Shipping Cubic 0.024650000m3

Download

MANUAL

FAQs

What will it run?

The Enerdrive 2000 Watt Pure Sine Wave Inverter will run devices such as:

  •  Coffee machine - generally around 1300-1600w
  • Microwave - 800 - 1800w
  • Kettle - 1800 to 2400w
  • Toaster - 800w to as high as 2400w
  • Laptops - most run between 60w and 180w
  • Hair Dryer - 900-1800w
  • Air conditioner - caravan AC's are generally around 1400-1700w & many more! 

 

Do I need circuit protection for installation?

Yes, you will need a 200A circuit breaker for installation. Whilst you can go with a fuse, we recommend the AllSpark 200A Circuit Breaker as it allows you to isolate via the push-to-trip function, and also can be re-set should an overload event occur (without blowing a fuse, which can be costly and inconvenient to replace).  

 

What size cable do I need?

You will need a 0B&S cable (49mm²)

Can’t Find answers to your questions?

We Also Recommend

FREQUENTLY BOUGHT TOGETHER

More From This Category