• Dual digital display: showing battery voltage & AC voltage
  • LED status indicator: to remind you when the inverter is turned on
  • Dual Australian AC output sockets
  • Anodized aluminium housing: corrosion resistant
  • Intelligent brushless cooling fans: >90% efficiency ensures optimal performance over long periods of use
  • Extensive Protection - High and low voltage, high current and temperature and short circuit, reverse polarity protected: prevents damage to unit in case of incorrect use 
  • Optional Plug & Play Pop-up Power Outlet
  • Emergency technical support 7 days a week
  • Manufactured for Australian conditions

This AllSpark Pure Sine Wave Inverter is a high quality, inverter for powering your sensitive 240V appliances, with 2000W of continuous power and a 4000W surge. It also comes with a 2500w overdrive function for shorter durations (10-30 mins subject to ambient temperatures) of additional max power.

What's in the box?

1 x AllSpark 2000 Watt Pure Sine Wave Inverter
1 x set of red/black screw terminals and flat washers for cable connection
1 x remote switching panel with mounting screws
1 x set of spare internal fuses




The AllSpark 2000 Watt Pure Sine Wave Inverter provides a genuine 2000 Watts of continuous power and has a 4000 Watt startup peak/surge power.


It also has a Max output of 2500 Watts allowing you to run combined loads for shorter durations, depending on the ambient temperature. i.e. on a cold night you can run 2500 Watts

This unit comes with a remote switching panel, with 5m cable and power status indicator to allow you to flush mount this control panel in any panel 3mm to 20mm thick. This means you can place your inverter out of sight (under a bed, in a cupboard, under a seat), and still easily turn the unit on and off when power is required. Comes with a protective box on rear of panel and mounting screws (template provided in manual).

With dual digital displays showing battery voltage & AC voltage, as well as dual Australian sockets, this AllSpark inverter is a smart and user friendly design.



Brand AllSpark
Shipping Weight 5.3000kg
Shipping Width 0.480m
Shipping Height 0.185m
Shipping Length 0.250m
Shipping Cubic 0.022200000m3
MODEL ALLSPARK 12V 2000/4000W Pure Sine Wave Inverter
Input Voltage 12V
Input Voltage Range 10.5 - 15VDC
Idle Current 0.8A
Efficiency >90%
Input Connector Red and black DC input terminals
Output Voltage 230V Australian Standard
Continuous Power 2000W
Surge Power 4000W
Output Frequency 50/60Hz
Output Receptacle 2x Australian Standard 10A AC Sockets
Terminal Block Connections Not Applicable
DC Under Voltage Protection 10V +/- 0.5VDC
DC Over Voltage Protection 15V +/- 0.5VDC
Overload CPU Controlled Auto Shut Down
DC Polarity Reverse Fuse Protection
Short Circuit CPU Controlled Auto Shut Down
Over Heat CPU Controlled Auto Shut Down
Audible Alarm Input DC Under/Over Voltage, Fault, Over Current, Over Temp
Cooling Twin Intelligently Controlled Brushless Cooling Fans
Indicator LED Power Status indicator Green (or Blue) LED glow if the device is working correctly, Red LED glow if there is a fault or device has entered into protection mode
LCD Display Displays DC Input & AC Output Voltages Along With Error Codes
Remote Switch Panel LED On/Off Indicator + On/Off Switch
Case High Quality Anodized Aluminium Heat Sink Case (Silver)
Dimensions (mm) 440L x 180W x 110H
Weight (kg) 4.6 incl. Remote






Do I need circuit protection for installation?

Yes, you will need a 200A circuit breaker for installation.

Whilst you can go with a fuse, we recommend the AllSpark 200A Circuit Breaker as it allows you to isolate via the push-to-trip function, and also can be re-set should an overload event occur (without blowing a fuse, which can be costly and inconvenient to replace).  


What will it run?

Our AllSpark 2000 Watt Pure Sine Wave Inverter will run continuously at 2000 watts unlike some cheap brands that claim they can, but struggle to provide half that output.

Any 240v device that you can plug in at home will run on this Inverter.

  •  Coffee machine - generally around 1300-1600w
  • Microwave - 800 - 1800w
  •  Kettle - 1800 to 2400w
  • Toaster - 800w to as high as 2400w
  • Laptops - most run between 60w and 180w
  • Hair Dryer - 900-1800w
  • Air conditioner - caravan AC's are generally around 1400-1600w
  • Any other 240v devices - Anything you need that's under 2000w - drones, cameras, computers, IT equipment, cordless tool chargers etc. 


Will this run my microwave?

YES - The AllSpark 2000/4000W Pure Sine Wave Inverter will run at 2000w continuous output until the battery goes flat and 4000w as a startup wattage.

Microwaves have 2 key numbers to take into account - the watts of cooking power, eg. many caravan microwaves are 800W, and the total input power, which is the total power that the microwave consumes from your battery.

Whilst it may have 800W of cooking power, it still uses more power to spin the turn table, run the control panel, internal light and fan etc, which makes up the rest of the power consumption. So before sizing an inverter, you need to check the input power (not the cooking watts) which is more likely 1200w for a 800w cooking power model.

For many microwaves there is 30-50% more to get to the input power above the cooking power. You may need to check your manual or online for the full specifications of your microwave.  


Will my existing battery power this Inverter?

Simple answer is - many will but not all. A 2000 watt inverter is a very high power device for a 12v system. It's the largest inverter we recommend running on 12v unless you have very large battery banks (over 300ah of Lithium Iron Phosphate or 450ah of AGM).

2000 watts at 12v is 166 Amps. It requires a minimum of 2 B&S cable with 175A circuit breaker or midi/mega fuse under 1m long or 0 B&S cables if over 1m in length to avoid voltage drop. A single AllSpark LiFePO4 battery will power this inverter by itself. Most LiFePO4 batteries on the market need 2 or more batteries in parallel to provide this much power.

Premium AGM batteries like Fullriver 120ah will provide sufficient power but only give you about 20 mins runtime at full power. Cheaper AGM batteries may struggle to provide sufficient power and will suffer from Voltage sag and may initiate the low voltage protection mode of the inverter. In this case, you need 2 batteries in parallel or a single AllSpark LiFePO4. The amount of storage you need comes down to how long you want to run for.


What cable size do I need for installation?

You will need a 0B&S cable

Can’t Find answers to your questions?

We Also Recommend


More From This Category