2 Outlet Power Board | Flush Mount | White | Plug & Play GPO | AllSpark

Save $$$ - no electrician required

A standard 240V power point - the kind you'd find on a wall at home - has to be installed by a licensed electrician. Full stop.

If you install one yourself and there's ever a fire or an insurance claim, that's exactly the kind of thing an insurer will use to avoid paying out. It's not a risk worth taking.

The AllSpark Dual Plug & Play White Power Board is different. It plugs directly into your existing inverter via a standard lead - no hardwiring, no sparky required, fully legal to install yourself.

Plug & play install - anyone can fit it

The reason this is genuinely DIY? There's no wiring, no crimping, no terminating. The board connects with IEC plugs (the same style as a kettle cord), so there are no live terminals and nothing to hardwire. Use a hole saw to drill a 90–92mm hole, pop the power board in, screw on the collar and plug it in. Sorted in an afternoon, no dramas.

Plug it straight into your inverter, or use the piggyback lead to share an outlet. A 4m extension lead is available if the inverter's mounted away from where you want the power.

Perfect for use around the home or office, install into bed heads and desks and bring power up to where you need it.

It is double pole switched to comply with Electrical wiring standards AS/NZS3001:2023 (for caravans, vehicles and transportable buildings) and as it has IEC and 3 pin plugs, is a simple plug and play installation. Simply drill a 90-92mm circular hole, fit the panel, screw on the collar and plug it in.

Install it in the side wings of your 4wd drawer system, caravan cabinets or even in your kitchen cabinets, bed frame or office desk. Anywhere you need a remote power extension that is flush mount, looks great and has individually switched circuits. It also comes built in with a 10A overcurrent protection *circuit breaker. 3m and 4m extension cables are also available as an optional purchase

*IMPORTANT NOTE - this is not an Residual current device. Being an electrical device you need to install it in a location that will not be exposed to water or moisture and keep it away from high dust environments to give you years of trouble free use.