200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

$4,339.00
Sale price  $4,339.00 Regular price  $0.00
Skip to product information
200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

SKU CODE: AS-20024LICMBT
$4,339.00
Sale price  $4,339.00 Regular price  $0.00

ALLSPARK LITHIUM BATTERIES ARE THE HIGHEST SPECIFICATION LITHIUM BATTERIES IN AUSTRALIA

  • Advanced cell technology with compact cells and casing
  • Bluetooth Integration
  • Water proof chassis mount case IP67
  • Exclusive Solid state BMS
  • Highest quality premium A grade prismatic cells
  • Greater than 3000 cycles @ 80% DoD
  • Power a 5000W Inverter from a SINGLE BATTERY
  • IEC 62619 Certified to meet AS/NZS 3001:2022 requirements
  • 7 Year Warranty

Description

YOUR 24V BUILD DESERVES A BATTERY BOX AS TOUGH AS THE TRACKS YOU'RE HEADING TO

 

The AllSpark 200Ah 24V is a chassis mounted battery box purpose-built for caravans, motorhomes, and off-road builds running 24V electrical systems. IP67 rated, IEC 62619 certified as a complete assembled unit, and built from powder-coated stainless steel, it's engineered to handle corrugated outback tracks, creek crossings, and extreme Australian temperatures without missing a beat.

 

Designed by Offroad Living in Australia, this battery box for caravans integrates full Bluetooth monitoring directly through the BMS - so you get accurate cell-level data, charge history, and real-time state of charge, all on your phone at no extra cost.

 

If you're searching for battery boxes for a caravan build and need a 24V solution that's compliant, protected, and built for the long haul, this is where the search ends.

 

 

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

Sits Above the Frame - Your Clearance Stays Intact

The AllSpark 24V chassis mounted battery box is designed to mount above the frame's lowest point - not hang below it. Typical battery boxes drop below the chassis rails and reduce your clearance on the tracks that matter most.

With AllSpark, the built-in mounting points allow for it to be installed securely above the frames lowest point, so the frame remains the lowest point, and you keep every millimetre of the clearance your build was designed around.

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

Full Battery Certification - Not Just the Components

IEC 62619 certification on the cells alone doesn't mean the complete battery is safe or compliant. AllSpark batteries are independently tested and certified as complete assembled units - cells, BMS, housing, workmanship - the lot.

For piece of mind and reliability - it's the stamp of approval you've been looking for.

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

Real-Time Battery Data - Already Included

External battery monitors add cost, complexity, and installation time. AllSpark's Bluetooth monitoring is integrated directly with the BMS and included in the price.

State of charge, individual cell voltages, current in/out, cycle count, and charge history - all visible on your phone, all drawing on data that an external shunt monitor simply cannot access.

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

24V BMS Protection - Automatic and Comprehensive

Mounted under a caravan, this battery will face high ambient temperatures, vibration, and the occasional water crossing.

The AllSpark BMS provides full automatic protection: high and low temperature (-20°C to +60°C), over-voltage, under-voltage, over-current, short circuit, and reverse polarity. Cell balancing runs automatically, extending the life of every cell in the pack without any input from you.

200Ah 24V Lithium Battery Waterproof Chassis Mount Bluetooth IP67

24V Power Means More From Your Inverter

Running a 24V system unlocks higher inverter efficiency and lower cable losses across the board. The AllSpark 200Ah 24V delivers the continuous current output to run a 5000W inverter from a single battery - putting serious appliances like induction cooktops, aircon, and high-draw tools well within reach.

Built with A-Grade prismatic cells rated at 200A continuous and 500A peak, the power output stays consistent under load.

WHATS IN THE BOX

  • 1 x AllSpark Bluetooth 24V 200ah powder coated stainless steel cased LiFePO4 battery with vent
  • M8 terminal bolts (2 length bolts) + nut covers

Warranty

7 YEAR MANUFACTURERS REPLACEMENT WARRANTY
30 DAY MONEY BACK GUARANTEE

Features

  • Advanced cell technology with compact cells and casing
  • Bluetooth Integration: Connect to a smart device to monitor performance, track usage data, and receive alerts.
  • Water proof IP67 chassis mount case
  • Powder coated stainless steel construction
  • Exclusive Solid state BMS designed and developed by Offroad Living
  • Highest quality premium grade prismatic cells resistance matched, long battery life and no voltage sag with a 20 year design life
  • Greater than 3000 cycles @ 80% DoD before reaching 85% of original capacity
  • Power a 5000W Inverter from a SINGLE BATTERY for high power devices including coffee machines, air conditioners, toasters and kettles
  • Rapid charge 
  • Designed to handle high vibration, dusty and wet environments
  • IEC 62619 Certified to meet AS/NZS 3001:2022 requirements
  • 7 Year Warranty

Specifications

SKUAS-20012LICMBTAS-30012LICMBTAS-40012LICMBTAS-20024LICMBTAS-10048BATLI200500CM
Battery Level Specifications
Capacity Amp Hours (C5)200300400200100
Watt Hours256038405120
Rated Voltage (V)12.825.651.2
Max Charge Voltage (V)14.629.258.4
Recommended Float Voltage (V)13.627.254.4
Low Voltage Cutoff (V)102040
Rapid Charge Current (1C) for 30 mins (A)200300400200100
Recommended Charge Current (A)*50–8050–12080–15050–8030–50
Charge ProfileCC/CV
Max Inverter Size (W — per single battery)2500300050005000
Max Continuous Discharge (A)200300200200
Peak Discharge — 10 secs (A)500600500500
Charge Cycles
@ 80% DoD# (≥85% residual capacity)
@ 60% DoD
@ 40% DoD
> 3200+#
> 4200+
> 5000+
Optimum Charge Temperature (˚C)< 45
Operating Temperature Range (˚C)−20 to +60
Storage Temperature Range (˚C)−40 to +125
Max Series VoltageParallel connection only — series not permitted
Max Batteries in ParallelUp to 6 (specialised fusing, cabling and busbar design needed when more than 3 are in parallel)
Dimensions incl. Mounts (mm)350 × 300 × 200400 × 300 × 200550 × 300 × 200
Case MaterialPowder coated stainless steel — with threaded vent pipe fitting and cap
Terminals2 × M8 Bolted Terminals (1 × Red Positive, 1 × Black Negative)
Weight (kg)2536.551.3
IP RatingIP67
Cell Level Specification
Cell TypePrismatic
Cell Connection4S1P4S2P8S1P16S1P
Cell Capacity3.2V @ 200Ah3.2V @ 300Ah3.2V @ 200Ah3.2V @ 100Ah
Cell CasingNickel plated steel
Cell Balancing Target (V)3.65 ±0.025
Cell Balance Current (mA)35 ±5
Cell Over Discharge LV Protection (V)2.5 ±0.025
Over Discharge ReleaseApply charge 10.5V+ & 1A+Apply charge 10.5V+ & 1A+Apply charge 10.5V+ & 1A+Apply charge 21V+ & 1A+Apply charge 42V+ & 1A+
Over Charge Cutoff (V)3.75 ±0.0253.65 ±0.0253.75 ±0.0253.65 ±0.025
Over Charge Detection Delay (secs)1–1.6
Over Charge Release (V)3.6 ±0.0625
Over Charge Release MethodAuto below release voltage
Over Current Detection (1) (A)220330220
Over Current Detection Delay (1) (secs)10
Over Current Detection (2) (A)500600500
Over Current Detection Delay (2) (secs)5
Over Current ReleaseRemove load — auto release
Short Circuit ProtectionExternal short
Short Circuit Detection Delay (µS)200–400
Short Circuit RecoveryRemove load — auto release
Internal Resistance (MOSFET Protection)≤20mΩ
Notes* Recommended charge current is for best cell longevity. # Cycle life independently laboratory tested at 0.25C discharge and 0.25C charge rate to 5000 cycles at 25°C controlled temperature. Electronic logs recorded during testing show residual capacity in excess of 85% of nameplate C5 capacity after 3000 cycles. In real-world conditions, users will experience a range of temperature, current, and voltage conditions which may affect actual battery performance over its life. Lower depths of discharge and high continuous charge/discharge rates will reduce overall cycle life.

AllSpark 24V 200Ah chassis mount battery dimensions

SKUAS-20024LICMBT
Battery Level Specifications
Capacity (C5)200Ah
Watt Hours5120Wh
Rated Voltage25.6V
Max Charge Voltage29.2V
Recommended Float27.2V
Low Voltage Cutoff20V
Rapid Charge (1C/30min)200A
Recommended Charge*50–80A
Charge ProfileCC/CV
Max Inverter Size5000W
Max Continuous Discharge200A
Peak Discharge (10s)500A
Cycles @ 80% DoD#> 3200+
Cycles @ 60% DoD> 4200+
Cycles @ 40% DoD> 5000+
Optimum Charge Temp< 45˚C
Operating Temp Range−20 to +60˚C
Storage Temp Range−40 to +125˚C
Max Series VoltageParallel only
Max Batteries in ParallelUp to 6 (specialised fusing, cabling and busbar design needed when more than 3 are in parallel)
Dimensions incl. Handles550 × 300 × 200mm
Case MaterialPowder coated stainless steel
Terminals2 × M8 Bolted
Weight51.3kg
IP RatingIP67
Cell Level Specification
Cell TypePrismatic
Cell Connection8S1P
Cell Capacity3.2V @ 200Ah
Cell CasingNickel plated steel
Cell Balancing Target3.65 ±0.025V
Cell Balance Current35 ±5mA
OD LV Protection2.5 ±0.025V
Over Discharge ReleaseApply 21V+ & 1A+
Over Charge Cutoff3.75 ±0.025V
OC Detection Delay1–1.6s
Over Charge Release3.6 ±0.0625V
OC Release MethodAuto below release voltage
Over Current Det. (1)220A
OCD Delay (1)10s
Over Current Det. (2)500A
OCD Delay (2)5s
Over Current ReleaseRemove load — auto
Short Circuit ProtectionExternal short
SC Detection Delay200–400µS
SC RecoveryRemove load — auto
Internal Resistance≤20mΩ
Notes* Recommended charge current is for best cell longevity. # Cycle life independently laboratory tested at 0.25C discharge and 0.25C charge rate to 5000 cycles at 25°C controlled temperature. Electronic logs recorded during testing show residual capacity in excess of 85% of nameplate C5 capacity after 3000 cycles. In real-world conditions, users will experience a range of temperature, current, and voltage conditions which may affect actual battery performance over its life. Lower depths of discharge and high continuous charge/discharge rates will reduce overall cycle life.

Downloads

FAQS

Q: I have received my battery, how do I turn it on and connect the Bluetooth?

A: Download the AllSpark App (see the Downloads section in your battery's listing, or enter "AllSpark" into the Google Play Store or the Apple App Store), then ensure your "location services" and bluetooth is turned on. You will see your battery appear in the list under "Bluetooth" - click on here, this will take you to the Dashboard screen. Scroll to the bottom and turn the Charge Switch and Discharge Switch on as required.

Q: How do I store my AllSpark LiFePO4 battery?

A: If you plan to have your batteries in storage for extended periods of time, disconnect/isolate any loads or parasitic power consumers. Charge/Discharge battery to 80% State of Charge. Battery can then be stored for up to 12 months. If storing for longer, re-charge to 80% SoC every 6-12 months.

Q: What is Current In/Out Net Value?

A: The Net Value is all the charge sources minus all the loads

Q: What do I do if my AllSpark LiFePO4 battery goes flat?

A: If you discharge your battery to 0% (21V or less), it will enter Low voltage protection mode. This will disconnect all loads and the battery and terminal voltage will show as 0-3V. When in LV protection mode, the BMS disconnects power to the battery terminals. To release it you simply open the AllSpark Bluetooth App on your smart device, turn the discharge function back to ON and let your charger take over. Most other brands need a "jump start" or external charger input or parallel connection to wake it up. AllSpark Lithium batteries are much smarter and simpler to wake up for charging. Note: if you don't have a charge source ready, it will go back to sleep again after a short time to protect the cells until you are ready to re-charge.

Q: Can I link another 200ah to give me 400ah? Or more?

A: Yes - these batteries can be connected in parallel, terminal to terminal, using the positive and negative M8 terminals. Up to 6 batteries can be connected in parallel. If you are connecting more than 3 in parallel, specialised fusing, cabling and busbar design must be applied. Please contact us for advice. The batteries should be within a few months of each other in age to ensure optimal performance and longevity.

Q: Is this battery certifed for use in Caravans?

A: Yes - AllSpark batteries are not only compliant, but are actually "Tested" and "Certified" for compliance with IEC 62616 standards (see downloads for certificate). Many sellers of LiFePO4 batteries in Australia claim to be "compliant" with the IEC 62616 standards, but have never actually had them tested or hold any certification for this compliance. Self claiming compliance with a standard without 3rd party certification is not only misleading, but is fraudulant advertising practises.

Reviews

PRODUCTS YOU MIGHT LIKE