Sold by component, the LMI can be bought as a single fuse holder and fuse or with the common input module plus bus bar for assemblies of two up to six midi fuse holders for separate circuits.

The Input Module has 1 x large 5/16 (M8) single stud with nut for the incoming cable connection from the battery. You then add as many Fuse holders as required (2-6) with the input module and busbar to connect them. These fuse holders clip together.  Best practice is to install the input module in the centre of the block.

Fuse holders have 2 x 3/16" (M5) studs with nuts.  You will need cable lugs with 5 or 6mm hole size max.  These are ideal for inline fuse protection for a single circuit or for a multi circuit fuse block/busbar set up with the following components:
• 1 x Input Module (single bolt input)
• 2 to 6 outgoing Fuse holder circuits connected to the input module by busbar
• 1 x busbar (1 hole for input module and 1 hole per fuse holder)
• 2 to 6 midi fuses

If you don't want the input module and busbar setup and just want multiple separate fuse holders, then select 1 fuse holder and increase the quantity in the order.

Each Fuse holder is sold separately or you can select it with multiple fuses. These can be used for any DC circuit protection up to a total busbar current of up to 400 amps and max of 200 amps per fuse holder. They will take any standard midi/AMI fuse.
• Dual battery installations
• Inverter cabling
• DCDC charger
• Solar installations
• Marine power supplies

Fuses are available in 30, 40, 50, 60, 70, 80, 100, 125, 175 and 200A sizes. 


The LMI provides efficient power distribution suitable for many applications such as: 4WD/Caravan
• Marine
• Construction
• Agriculture
• Heavy Trucking
• Bus
• Specialty Vehicles



  • Heavy duty modular fuse panel
  • Connect up to 6 x fuse holders and 1 x input module onto a single busbar
  • Uses standard Midi/AMI fuses up to 200A per circuit
  • Can be used as standalone single fuse holders
  • Individual fuse covers
  • Maximum combined 400A continuous per busbar
  • Suitable for in engine bay applications
  • 30, 40, 50, 60, 70, 80, 100, 125, 150, 175 & 200A fuses available
  • Owned & run by an Aussie Family
  • Manufactured for Australian conditions


Brand AllSpark
Shipping Weight 0.0410kg
Shipping Width 0.015m
Shipping Height 0.145m
Shipping Length 0.003m
Shipping Cubic 0.000007000m3