SLIMMER DESIGN AND FULL METAL CASING

 

The Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested inverter platform, it now comes with a new slimmer design and full metal casing. 

 

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.  

 

Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.

 

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before

 

Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.

 

Bluetooth built-in: fully configurable with a tablet or smartphone

  • Low battery voltage alarm
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage: 210 – 245 V
  • Frequency: 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level
  • Alarm relay Monitoring:
  • In- and output voltage, load and alarms

 

VE. DIRECT COMMUNICATION PORT

The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. 

 

PROVEN RELIABILITY

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. 

 

HIGH START-UP POWER

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. 

 

ECO MODE

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable).  If the load exceeds the preset level, the inverter will remain on. 

 

REMOTE ON/OFF

A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). 

 

LED DIAGNOSIS

Please see manual for a description. 

 

WHATS IN THE BOX

  • 1 x Victron 12V 2000W Inverter Smart

5 YEAR MANUFACTURERS WARRANTY

  • Built-in bluetooth - fully configurable with a tablet or smartphone
  • VE. Direct Communication Port - to configure or monitor parameters
  • High start-up power - for high start-up loads
  • ECO mode 
  • Remote on/off 

PRODUCT SPECIFICATIONS - VICTRON 12V 2000VA INVERTER SMART

MODEL 12V 2000VA INVERTER SMART
Parallel and 3-phase operation  No
INVERTER
Input voltage range     9.3 – 17 V     18.6 – 34 V     37.2 – 68 V 
Output Output voltage: 230 VAC ±2 %    50 Hz or 60 Hz ± 0.1 % (1) 
Cont. output power at 25 ºC    (1)  2000 VA 
Cont. output power at 25 ºC  1600 W 
Cont. output power at 40 ºC  1450 W 
Cont. output power at 65 ºC  1000 W 
Peak power  4000 W 
Dynamic (load dependent) DC low shut down (fully configurable)  Dynamic cut-off, see here
Max. efficiency  92%
Zero load power  8W
Zero load power in ECO mode  0.6W
GENERAL
Programmable relay (2)  Yes
Stop & start power ECO-mode  adjustable
Protection (3)  a - g 
Bluetooth wireless communication  For remote monitoring and system integration
VE.Direct communication port  For remote monitoring and system integration 
Remote on-off  Yes
Common Characteristics  Operating temperature range: -40 to +65 ºC (fan assisted cooling) Humidity (non-condensing): max 95 % 
ENCLOSURE
Common Characteristics  Material & Colour: steel (blue RAL 5012; and black RAL 9017)     Protection category: IP21 
Battery-connection  M8 bolts 
230 VAC-connection  Screw terminals 
Weight 13 kg 
Dimensions (hxwxd)   485 x 219 x 125 mm 
STANDARDS
Safety EN 60335-1
Emission Immunity  EN 55014-1 / EN 55014-2/ EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 
Automotive Directive  ECE R10-5 

1) Non-linear load, crest factor 3:1

2) Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function.

AC rating: 230 V / 4 A    

DC rating: 4 A / 35 VDC, 1 A / 60 VDC  

3) Protection key:    

a) output short circuit    

b) overload    

c) battery voltage too high    

d) battery voltage too low    

e) temperature too high    

f) 230 VAC on inverter output    

g) input voltage ripple too high 

 

Specifications

SKU PIN122201000
Barcode # 8719076042655
Brand Victron
Shipping Weight 14.0000kg
Unit Of Measure ea

Download

DATA SHEET

 

MANUAL