The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.

If required, Bluetooth can be disabled.

 

Features

  • Disconnects the battery from non-essential loads before it is completely discharged.
  • Bluetooth enabled.
  • Nine predefined engage/disengage levels can be set with the programming pin.

 

  • Owned & run by an Aussie Family
  • Manufactured for Australian conditions

VICTRON BATTERY PROTECT

Model Smart BP-220 BP 48-100
Maximum continuous load current* 220A 100A
Peak current (during 30 seconds) 600A 250A
Operating voltage range 6-35V 24-64V
Current consumption BLE On When on: 1.4mA  When off or low voltage shutdown: 0.9mA When on: 2mA When off or low voltage shutdown: 1.5mA
BLE Off When on: 1.2mA  When off or low voltage shutdown: 0.7mA
Alarm output delay 12 seconds
Maximum load on alarm output 50mA (short circuit proof)
Load disconnect delay 90 seconds (immediate if triggered by the VE.Bus BMS)
Load reconnect delay 30 seconds
Default thresholds Disengage: 10.5V or 21V Engage: 12V or 24V Disengage: 42V Engage 48V
Operating temperature range Full load: -40oC to +40oC (up to 60% of nominal load at 50oC)
IP rating Electronics: IP67 (potted) Connections: IP00
Connection M8
Mounting Torque 9Nm
Weight 0.8kg 1.8lbs
Dimensions (HxWxD mm) 60 x 123 x 121 60 x 123 x 120
* The BatteryProtect is not designed for reverse currents from charging sources

 

 

Specifications

SKU V-BP-220
Brand Victron

Download

DATA SHEET MANUAL